INTRODUCING THE XT-3
AGGRESSIVE APPROACH & DEPARTURE ANGLES, ENHANCING OFF-ROAD CAPABLITIES
The XT-3 chassis has been certified engineered (FEA Tested). Manufactured autonomously from the body. Utilising the latest laser/CNC processes.
The chassis has been designed and engineered, as a one piece chassis.
Unlike traditional chassis over A-Frame designs, this allows for better articulation, on/off road performance and manoeuvrability.
Additional benefits of the sealed one piece Tekton chassis, is the prevention of any dust, water or sand ingress.
The undercarriage of the XT-3, houses the spare tyre which sits above the chassis rails.
The rear of the chassis, has been equiped with rear recovery points and can be optioned with a rear recovery winch.
The XT-3 suspension has been developed for expedition intent, absorbing corrugations and rutted terrain.
The XT-3 is equipped with Teko independent air bag suspension. Featuring air bags and four shock absorbers.
The on board air compressor and air tank, have been mounted internally. Protecting them from dust and water ingress.
A tyre inflation kit is also provided.
The majority of other high end off road caravans & campers, fitted with independent airbag suspension set ups, have around 130mm / 5 inches of travel.
The XT-3 has 250mm / 9.8 inches, almost double the travel over some of its competitors. Features like remote control and auto levelling are available.
The XT-3 stud pattern can also be configured to match your tow vehicle, along with rims & tyres.
The XT-3 utilises our innovative and exclusive proprietary design. Leading to a reduced overall footprint, without compromise on internal living space.
While maintaining an extended A-Frame. The XT-3 is over 2ft smaller overall (hitch to rear body) than its competitors.
By comparison, other campers
with the same size body as the XT-3 (3 metres/9.8ft). Have an overall length in excess of 5 metres, while the XT-3 has an overall length of 4.3 metres.
This enables better manoeuvrability and articulation both on/off road. Allowing you to access places others can only dream of in the same body size camper.
The XT-3 is the only camper on the market, with a fixed queen bed (that does not need to be lifted during the day). Large external kitchen on an overall length of 4.3 metres.
The XT-3 body is constructed out of 30mm woven-roven fibreglass/XPS foam core composite panel. Including the body (side walls, front & rear), roof and floors.
Featuring our unique monocoque/unibody design, with no joins, built as one sealed unit.
The entire XT-3 body is then coated in a 2K epoxy primer and finished in a urethane protective coating, in a colour of your choice.
Providing an extremely energy and thermal efficient compartment, able to withstand the most extreme climates all over the world.
Due to our unique design, we have been able to create one of the most aerodynamically efficient vehicles on the market.
The XT-3 is also lighter than its competitors with the same floor plan, size and specifications sheet.
Providing you with lower fuel costs when travelling.
The XT-3 has an abundance of external storage options.
The front of the camper is fitted with a large toolbox, as well as a tunnel storage compartment.
The XT-3 also has a wood rack and two side jerry can holders.
Entry into the XT-3 is via double large custom designed and manufactured doors.
All of which is covered by a 180 degree awning.
A bull finch external shower can be found on the right hand side of the camper, accompanied with a shower ensuite.
The roof on the XT-3 can also be optioned with a roof rack and roof top tent.
The interior of the XT-3 features a luxurious queen size bed, with bed side tables and plenty of storage compartments.
Unlike traditional campers in its class the XT-3, provides internal foot wells either side of the bed, allowing you plenty of room for storage and a dry place to take off your shoes and store them.
The XT-3 can be configured with a bunk to accomodate young children. A roof-top tent can also be added to provide an additional sleeping area.
The kitchen of the XT-3 is complete with everything you need. Situated at the rear of the camper, makes preparing food that much easier.
Featuring a 2 burner induction cooktop, sink with hot & cold water, upright 65 litre compressor fridge / freezer and plenty of storage draws & cupboards.
The ABS composite cabinetry, is capable of withstanding ever changing conditions.
The rear door of the XT-3 provides plenty of shelter from any type of weather.
The XT-3 is fitted with a custom Victron energy power management system.
With 330 amp lithium battery (Electric vehicle cell grade), 500 watts of twin cell mono crystalline solar panels, 2,000 watt pure sine wave inverter with automatic AC transfer, 80 amp AC charger, 30 amp DC-DC charger and 60 amp MPPT solar charger. you will be able to stay off the grid longer.
500 amp lithium battery upgrade and 700 amp lithium battery upgrade available.
The 7" touch screen display and app allows you to monitor battery state of charge, water levels, solar and anderson inputs.